Brief Introduction:
Wireless Rolling Door Sensor: Easy installation, power saved, non-false alarm. It is specially designed for rolling door to prevent any illegal access. Easy installation on the rolling door can send out the alarm to frighten the burglar and awake the owner. It is widely used for rolling and shutter door, garage or store etc.
Features:
1.Low voltage fault monitoring reports
2.2262/1527 IC,oscillation resistance optional
3.With dual function of emergency switch & magnetic door
4.Low power consumption, long battery life
Technical Parameters
| Power Voltage | 12V DC, with dry battery model: 23A |
| Standby Currents: | ≤5uA |
| Alarm Current: | ≤10mA |
| Wireles Transmitting Distance: | noninterference ≥200m ; indoor about 30~50 m |
| Wireless Transmitting Frequency: | 433.92 MHZ ± 2KHZ or 315 MHZ |
| Power | standby :0.01W, Alarm :0.09W |
| Emitting frequency | >10mw |
| Operating Temperatue: | less than 95% |
| Transmitters Size: | 90 mm(L)×55 mm(W)×22 mm(H) |
Installation:
Code preset by factory. If not, please follow the following code diagram to play it by clamp
Metalized magnetic part: It should be installed in the motion door and keep it parallel with the side of the base.
Metalized reed pipe: It should be installed on the floor by screws, and keep it at the same level and parallel with the metalized magnetic part, the distance between two parts no more than 2cm.
Wireless emitting sensor: There is a wire connected with the metalized reed pipe, and must keep within the receiving area, the signal wire should be installed along the floor. For example, if you are on the 8th floor, but your garage is on the first floor. You can install the wireless emitting sensor in your home, and extend the wire into the garage.
Open the cover of transmitter, fix battery in proper and than cover it.
Test it: put two metalized parts close and than open it. If the signal LED flashes, it means normal work.
After installation, open the door, the signal LED flashes about one second, it means installing completed
- Be used to detect rolling door if it is illegal opened or moved, It is one of the ideal solutions for providing concealed protection for tight spaces, especially for Shutter door.
- Easy installation, power saved, non-false alarm
Why Choose Us?
1. HongAnKe is a factory with own engineer team and production lines.
2. 10 years experience is the security fields.
3. 100% test of products.
4. OEM / ODM acceptable
5. Honest and Quality is our faith.
Payment Term:
Bank Transfer (T/T)
